For users who have purchased laser cutting machines, the maintenance of laser cutting machines is also a matter of concern. Since the price of a laser cutting machine ranges from hundreds of thousands to millions, it is really expensive, so using a good laser cutting machine can get twice the result with half the effort, and maintaining a laser cutting machine can greatly reduce the cost. It can prolong the service life of the equipment and save the user’s use cost. So how to maintain the laser cutting machine cover?
1. Be sure to check the optical path before work to see if it is normal
The optical path system of the machine is completed by the reflection of the reflector and the focusing of the focusing mirror. Although the focusing mirror usually does not shift in the optical path, it is recommended that the user must check whether the optical path is normal before each work.
2. Regularly clean all components
The metal laser cutting machine often generates a lot of dust inside and outside during cutting. In order to ensure that the laser has been in normal working condition, after two weeks of continuous operation or when it is stopped for a period of time, the components in the optical path such as the laser lens should be cleaned before starting the machine. Check to make sure that there are no abnormal phenomena such as dust pollution and mildew in each optical component. If there is any abnormal phenomenon above, it should be cleaned and cleaned in time to ensure that each optical component will not be damaged under strong laser irradiation. We should vacuum the dust and dirt in the machine every week to ensure the accuracy of the machine’s operation.
3. Tightening and lubrication of screws and couplings
After the motion system works for a period of time, the screws and couplings at the motion connection will be loose, which will affect the stability of the mechanical movement. During the operation of the machine, it is necessary to observe whether there is any abnormal noise or abnormal phenomenon in the transmission parts, and tighten the screws one by one with tools at intervals. The first tightening should be about a month after the equipment is used.
4. Heat protection and heat removal
The increase in temperature will cause the insulation performance of the equipment to decrease and the component parameters to deteriorate. Usually, it is stipulated that the working environment of the cutting machine does not exceed 40 °C, and 20~25 °C is suitable.
Zhengzhou Baiwei‘s professional and high-level installation team can greatly improve the installation efficiency, shorten the installation cycle, and save a lot of production time for the enterprise. The project quality and progress in the whole installation and commissioning process are all under control, and the customer only needs to carry out basic coordination, which saves worry and effort.
